Specification Of High Quality Of WR Series Water Pump Bearing With One Roller One Ball Type

Water pump bearing is double row bearings and in contrast to conventional double row bearing, it do not have an inner ring but raceways machined directly into the surface of the shaft. As a result, there is more space available for the rolling elements, giving a higher specific load carrying capacity than that of solutions with conventional single bearings. Furthermore, it is possible to achieve economical combinations of ball and roller rows. In a small design envelope, this gives a broad range of load carrying capacities. The use of a common outer ring for two rows of rolling elements prevents misalignment defects, eliminating the risk of undesirable distortion of the bearings.

In water pump bearings, the ends of the shaft normally extend beyond the outer ring on both sides. The length and diameter of these extended sections are matched to the specific application. This results in a simple, ready-to-fit bearing unit that is primarily used in water pumps for road vehicles.

However, they are not restricted to this application. Due to the advantages described above, they have a wide range of possible applications.

 
Structures Of High Quality Of WR Series Water Pump Bearing With One Roller One Ball Type
1. Roller-three points contact ball bearing.
2. Roller-four points contact ball bearing.

Features Of High Quality Of WR Series Water Pump Bearing With One Roller One Ball Type

1. High radial/axial load ability design.
2. Strengthen load ability on the drive end.
3. Contact angle-25 degrees.
4. Axial clearance is small.

Pictures Of High Quality Of WR Series Water Pump Bearing With One Roller One Ball Type

Material Of High Quality Of WR Series Water Pump Bearing With One Roller One Ball Type
1. Shaft is industion hardened steel 100Cr 6 / 16 MnCr5 for special use.
2. The rolling element sets are made of harden steel 100Cr6.
3. Seal rings have three kinds of materials for your choose:
    1) NBR which stand for Nitrile Butadiene Rubber.
    2) HNBR which stand for Hydrogenated Nitrile Butadiene Rubber.
    3) FPM which stand for Fluoro Rubber.
    Note: different material of seal ring can be used on the two sides of the bearing.

Application Of High Quality Of WR Series Water Pump Bearing With One Roller One Ball Type

1. Auto engine water pump
2. Fans

3. Tension pulleys

4. Vane pumps

5. Angle grinders

Jiangsu New wirlwind Auto bearing Co., Ltd is one of the leading suppliers in the field of Water pump bearings which is also named integral shaft bearing.
Our main products are 1226-3258 series water pump bearings.
Annual production capacity is 350,000 sets.