Basic Info.

Model NO.:Model No.: 885151E

OEM No.:Ih 526769c1 T26882 W2385-2

Heat Treatment:High-Frequency Quenching

Rolling Elements:Ultra-Precision Crowned Roller

Structure:Double Row Raceway

Grease Brand:Shell Alvania R3, Esso Unirex N3

Material:100cr6 or SAE 52100

Size:K=30 a=97.9 D=15.918

Export Markets:North America, South America, Eastern Europe, Southeast Asia, Mid East, Eastern Asia, Western Europe

Additional Info.

Trademark:XXF

Packing:Wooden Case or According to Your Requires.

Standard:SGS

Origin:China

HS Code:8482109000

Production Capacity:3, 500, 000sets/Year

Product Description

Long stem bearing 885151E for case-IH cult. Gauge wheels.(OEM NO.:IH 526769C1 T26882 W2385-2  GLENCOP3573)

Water pump bearing is double row bearings and in contrast to conventional double row bearing, it do not have an inner ring but raceways machined directly into the surface of the shaft. As a result, there is more space available for the rolling elements, giving a higher specific load carrying capacity than that of solutions with conventional single bearings. Furthermore, it is possible to achieve economical combinations of ball and roller rows. In a small design envelope, this gives a broad range of load carrying capacities. The use of a common outer ring for two rows of rolling elements prevents misalignment defects, eliminating the risk of undesirable distortion of the bearings.

In water pump bearings, the ends of the shaft normally extend beyond the outer ring on both sides. The length and diameter of these extended sections are matched to the specific application. This results in a simple, ready-to-fit bearing unit that is primarily used in water pumps for road vehicles.

However, they are not restricted to this application. Due to the advantages described above, they have a wide range of possible applications.

Products Type Of  Point Contact Rolling Structure & Surfinishing Crowed Rolling elements auto water pump bearing

We present two kinds of double-row ball bearings for water pumps as below:

1. WB type with two rows of balls as the first picture.

2. WR type with one row of balls and one row of rollers as the second picture.
 

Material Of WR Series Point Contact Rolling Structure & Surfinishing Crowed Rolling elements auto water pump bearing
Shaft is industion hardened steel 100Cr 6 / 16 MnCr5 for special use.
The rolling element sets are made of harden steel 100Cr6.
Seal rings have three kinds of materials for your choose:
1. NBR which stand for Nitrile Butadiene Rubber.
2. HNBR which stand for Hydrogenated Nitrile Butadiene Rubber.
3. FPM which stand for Fluoro Rubber.
Note: different material of seal ring can be used on the two sides of the bearing.

Application Of oint Contact Rolling Structure & Surfinishing Crowed Rolling elements auto water pump bearing

1. Auto engine water pump
2. Fans

3. CASE-IH Coulter. Gauge wheels.

     Good performance,stable quality.

4. Vane pumps

5. Angle grinders